NivaarExam PrepOfficial exam papers ↗

04-BS-15: December 2019

Nivaar worked solution (AI-drafted; not reviewed by a licensed engineer)

  1. Question 1 Orthographic Views, Dimensioning & Feature-Based CAD Sequence
  2. Question 2 Isometric View from a Third-Angle Multiview Drawing
  3. Question 3 Section View Selection
  4. Question 4 Types of Fits for Holes and Shafts
  5. Question 5 Cantilever Deflection — Beam Formula vs. FEA vs. Physical Test
  6. Question 6 Customer Needs vs. Product Design Specifications

Start with Question 1 →

National Exams December 2019 — 04-BS-15, Engineering Graphics and Design Process (3-hour, closed-book, no calculator; 6 questions, 100 marks total; all sketches freehand, no straightedge).

Reference texts: Bertoline & Wiebe, Technical Graphics Communication (4th ed.) — orthographic/isometric/section-view theory; Giesecke et al., Technical Drawing / Engineering Graphics (15th ed.) — ASME Y14.5 dimensioning and glass-box projection theory; Ulrich & Eppinger, Product Design and Development (7th ed.); Hibbeler, Mechanics of Materials (10th ed.).

Check: this is a freehand technical-sketching exam with no numerical exam data (dimensions are explicitly stand-ins, "xx", per the exam's own instruction). Every answer sketch for Questions 1–3 was produced by rebuilding the part as a 3-D model from the printed views, then projecting that model with a hidden-line test (a line is dashed only where solid material lies between it and the viewer).