16-Civ-A2 Elementary Structural Design, December 2015: worked solutions

Paper format. National Examinations, December 2015 — 98-Civ-A2 Elementary Structural Design, 3-hour closed-book paper (textbooks and design handbooks permitted). Seven questions in three parts: Part A (A1–A3, steel), Part B (B1–B3, reinforced concrete), Part C (C1, timber). The candidate answers two from Part A, two from Part B and the one question in Part C — five solutions, all of equal value. All seven are solved here, because the set is a study resource rather than an exam script.

Reference texts.

CSA S16, Design of Steel Structures — Clauses 11 (classification), 13.3 (compression), 13.5–13.6 (flexure), 13.8 (axial + bending), 13.11–13.12 (bolts, block shear).
CISC, Handbook of Steel Construction — section property tables for W-shapes and hollow structural sections.
CSA A23.3, Design of Concrete Structures — Clauses 10 (flexure and axial), 11 (shear), 10.15 (slender columns).
CSA O86, Engineering Design in Wood — Clause 6 (modification factors), Clause 7 (sawn lumber, bending and shear).
Canadian Wood Council, Wood Design Manual — specified strengths for Beam and Stringer grades.

Check — load factoring. Note 6 on page 1 states “all loads shown are unfactored”, so every load taken from a figure is a specified load and is factored here as 1.25D + 1.5L (NBCC Table 4.1.3.2, Case 2), treating the drawn point loads as live and member self-weight as dead. Where a question states a load directly in its text without a dead/live split (B3), that load is taken as already factored; this is stated again at that question.

16-Civ-A2 Elementary Structural Design: December 2015