Paper format. National Examination, 07-Mec-A4 Design and Manufacture of Machine Elements, May 2014 — 3 hours, open book, any non-communicating calculator permitted. Eight questions on six pages, divided into Part A (manufacturing processes, Q1–Q4) and Part B (machine-element design, Q5–Q8). The rubric asks for three from Part A and two from Part B, five questions constituting a complete paper, all of equal value (20 % each). All eight questions are solved here, because this document is a study resource rather than an examination script.
Reference texts.
- Kalpakjian & Schmid, Manufacturing Engineering and Technology, 7th ed. — sand casting and casting defects (Ch. 10–12), sheet-metal shearing and fine blanking (Ch. 16), bulk deformation and hydrostatic extrusion (Ch. 15), fusion welding and weld defects (Ch. 30–31).
- Budynas & Nisbett, Shigley's Mechanical Engineering Design, 10th/11th ed. — eccentrically loaded shear joints (Ch. 8), statically indeterminate beams and deflection superposition (Ch. 4), welded joints in torsion (Ch. 9).
- Hibbeler, Mechanics of Materials, 10th ed. — combined loading, transverse shear and stress transformation / Mohr's circle (Ch. 7–9).
- AWS D1.1 Structural Welding Code — Steel and CSA W59 — preheat, hydrogen control and minimum fillet-weld sizes (Canadian practice).
- ASM Handbook Vol. 15 Casting and Vol. 6 Welding, Brazing and Soldering — hot tearing, solidification cracking and riser/chill practice.
Check: Part B is entirely figure-driven. Every number below was read from the printed figures (Figures A, B, C and S7). Two readings are worth stating explicitly so a grader can substitute a different interpretation without redoing the method: (i) in Figure A the rivet group is five rivets in the top row plus one rivet 200 mm below, the lower rivet lying on the same vertical line as the third top rivet; (ii) in Figure B the 67 500 N horizontal force acts on the centroidal axis of the section, so it produces pure tension and no additional bending.
PART A — Manufacturing Processes
