Nivaar worked solution (AI-drafted; not reviewed by a licensed engineer)
Paper format. PEO / Engineers Canada National Examinations, December 2019 — 16-Mec-A5, Electrical & Electronics Engineering (Mechanical Engineering discipline). Three hours, closed book, one approved Casio or Sharp calculator. Eight questions; any five constitute a complete paper and each question is of equal value, so each counted question carries 20 marks. All eight questions are solved below, because this set is a study resource rather than an exam script. The front page prints the constants $\pi = 3.14159$, $1\text{ hp} = 746\text{ W}$ and $\mu_0 = 4\pi\times10^{-7}\text{ H m}^{-1}$; all three are printed clearly on the front page and are used exactly as given.
Reference texts. A. S. Sedra and K. C. Smith, Microelectronic Circuits, 8th ed. (BJT biasing and load lines, op-amp frequency response); M. M. Mano and M. D. Ciletti, Digital Design, 6th ed. (universal-gate synthesis, DeMorgan reduction); S. J. Chapman, Electric Machinery Fundamentals, 5th ed. (dc machines, transformer magnetic circuits, induction-motor testing and slip); C. K. Alexander and M. N. O. Sadiku, Fundamentals of Electric Circuits, 7th ed. (phasor analysis, power factor, first-order transients); W. H. Hayt and J. A. Buck, Engineering Electromagnetics, 9th ed. (magnetic circuits and induced emf).
the gated-logic array, the transformer magnetic circuit, the op-amp band-pass Bode question, the RC transient and the parallel ac network as printed in December 2014; and the induction-motor slip / speed-torque question as printed in December 2016. The full working is transcribed in place below rather than cross-referenced, so this paper stands on its own as a study document.