Nivaar worked solution (AI-drafted; not reviewed by a licensed engineer)
Paper format: National Examinations, December 2019 — 16-Mec-B6 Fluid Machinery. Closed book, three hours, 22 pages. Section A is calculative (Questions 1–5) and Section B descriptive (Questions 6–8); a candidate answers four questions from Section A and two from Section B — six questions of ten marks each, 60 marks in all. Reference data for individual questions are supplied in the Attachments on pages 12–17, and the nomenclature, general constants and reference equations on pages 18–22. All eight questions are solved below, because this set is a study resource rather than a three-hour sitting.
Check — angle conventions are taken from the paper's own attachments, and on this sitting they are uniform. The gas-turbine velocity diagram on page 13 strikes $\theta$, $\phi$, $\gamma$ and $\delta$ off the tangential direction (the plane of rotation); the pump diagram on page 14 strikes $\alpha_1$, $\alpha_2$, $\beta_1$ and $\beta_2$ off the tangential direction as well; and the Francis diagram on page 15 defines $\alpha_1$ between $V_1$ and $u_1$, again tangential. Every angle below is therefore measured from the direction of blade motion. Every constant used is the paper's own page-19 value: $g = 9.81\ \text{m}\,\text{s}^{-2}$, $\rho_{\text{water}} = 1000\ \text{kg}\,\text{m}^{-3}$, $p_{\text{atm}} = 100\ \text{kPa}$ and $p_{\text{vapour}} = 1.71\ \text{kPa}$ at $15^{\circ}\text{C}$.
