Nivaar worked solution (AI-drafted; not reviewed by a licensed engineer)
Paper format: National Examinations, May 2018 — 98-Mar-B5 Fluid Machinery. Closed book, three hours, 21 pages. Section A is calculative (Questions 1–5) and Section B descriptive (Questions 6–8); candidates answer four from Section A and two from Section B, six questions of ten marks each for a total of 60. Reference data for individual questions are supplied on pages 11–16 and the nomenclature, constants and reference equations on pages 17–21. All eight questions are solved below, because the set is a study resource rather than a three-hour sitting.
Check — angle conventions taken from the paper's own attachments. The compressor attachment on page 11 strikes $\alpha_1$ and $\beta_1$ off the axial component $C_{X1}$, so in Questions 1 and 2 all blade and vane angles are measured from the axial direction. The steam-turbine attachment on page 13 and the Francis attachment on page 14 strike $\theta$, $\phi$, $\gamma$, $\delta$, $\alpha$ and $\beta$ off the tangential (blade-motion) direction, so Questions 3 and 5 use the tangential reference. Mixing the two is the single most common way to lose all the marks on a velocity-diagram question. Every constant used below ($g = 9.81\ \text{m}\,\text{s}^{-2}$, $\rho_{\text{water}} = 1000\ \text{kg}\,\text{m}^{-3}$, $\rho_{\text{air}} = 1.21\ \text{kg}\,\text{m}^{-3}$ at 15 °C, $c_p = 1.005$ and $c_v = 0.718\ \text{kJ}\,\text{kg}^{-1}\text{K}^{-1}$) is taken from the paper's page 18 rather than from a textbook.
