NivaarExam PrepOfficial exam papers ↗

04-BS-15: May 2013

Nivaar worked solution (AI-drafted; not reviewed by a licensed engineer)

  1. Question 1 Orthographic Projection from an Isometric Pictorial
  2. Question 2 Isometric Pictorial from an Orthographic Projection
  3. Question 3 Auxiliary View — True Shape of an Oblique/Inclined Face
  4. Question 4 Dimensioning an Orthogonal Projection
  5. Question 5 Constructive Solid Geometry — Boolean Primitive Construction
  6. Question 6 Section View Selection
  7. Question 7 First-Angle vs. Third-Angle Projection
  8. Question 8 Size, Location, and Coordinate Dimensioning
  9. Question 9 Two Section Types — Full, Half, Offset (any two of three)
  10. Question 10 Drawing Documentation Terms (any two of three)

Start with Question 1 →

04-BS-15 Engineering Graphics & Design Process — May 2013, 3 hours, closed book (candidates may use a Casio or Sharp approved calculator). Ten questions of equal value; all sketches must be freehand and neat; each question carries a printed grading rubric (criterion / grade) reproduced beside its solution below. Canadian (CSA/ANSI, now CSA B78.1 harmonized with ASME Y14.5) drafting conventions are used throughout.

Reference texts: Bertoline & Wiebe, Technical Graphics Communication; Giesecke et al., Technical Drawing / Engineering Graphics (ASME Y14.5 dimensioning, CSA B78.1 drafting practice).