NivaarExam PrepOfficial exam papers ↗

22-Elec-B5 Advanced Electronics: May 2015

Nivaar worked solution (AI-drafted; not reviewed by a licensed engineer)

  1. Question 1 Bipolar Cascode with an Ideal Current-Source Load
  2. Question 2 Common-Emitter Stage — Mid-Band Gain and Both 3 dB Frequencies
  3. Question 3 Complementary MOS Class B Output Stage
  4. Question 4 MOS Differential Pair with Current-Source Loads
  5. Question 5 Sizing the Output Coupling Capacitor of an Audio CS Stage

Start with Question 1 →

Paper format. National Exams, May 2015 — 07-Elec-B5 Advanced Electronics. Three hours, CLOSED BOOK, any non-communicating calculator permitted. Five questions, 20 marks each; all five must be answered. The paper directs candidates to state any assumptions made, to treat ground and chassis as common, and to assume ideal op-amps on ±15 V rails unless a question says otherwise.

Reference texts. B. Razavi, Fundamentals of Microelectronics, 2nd ed. (Ch. 9, Cascode Stages and Current Mirrors — Question 1 cites Example 9.9 by name); A. S. Sedra & K. C. Smith, Microelectronic Circuits, 8th ed. (Ch. 8 Building Blocks of IC Amplifiers, Ch. 9 Differential and Multistage Amplifiers, Ch. 10 Frequency Response, Ch. 12 Output Stages and Power Amplifiers); P. R. Gray, P. J. Hurst, S. H. Lewis & R. G. Meyer, Analysis and Design of Analog Integrated Circuits, 5th ed. (Ch. 3–4 for the current-source-loaded pair).

How the figures were recovered. component placement, which terminal the input drives, and whether a load pair is a mirror or two independent sources. Where the printed data and the drawn topology cannot both be satisfied, the reading adopted is stated in a check note rather than silently chosen.